- Overview of Brick Backyard Edging
- Steps for Landscaping Bricks for Edging
- 1. Order the Bricks
- 2. Scout the Curves
- 3. Mark the Bricks
- 4. Switch the Marks
- 5. Lower the Keystones
- 6. Dig the Trench
- 7. Examine the Depth
- 8. Pack the Paver Base
- 9. Combine the Stone Mud
- 10. Lay the Bricks
- 11. Fill the Gaps
- 12. Hose off the Edging
An artfully organized band of bricks handsomely defines the boundary between grass and backyard. And when you set up the bricks flush with the bottom, additionally they function a useful mowing information: You possibly can run the wheels of a push mower proper on high of the border edging and just about dispense with the string trimmer.
Some folks set the pavers in concrete, however there is no want when you make a correct dry mattress. Which means digging down previous the loamy topsoil to stop frost heave from disrupting the bricks come winter; when you do, laying a mattress of compacted paver base and stone mud offers the bricks a strong basis and supplies drainage whereas stopping weeds or roots from arising.
You're reading: how to build a brick garden edge
You might want to know: how to make a raised garden bed on concrete
Observe alongside as This Outdated Home senior technical editor Mark Powers guides you thru the set up of this useful yard accent.
Overview of Brick Backyard Edging
- SATURDAY: Kind the ditch (Steps 1-7).
- SUNDAY: Set the bricks (Steps 8-12).
Steps for Landscaping Bricks for Edging
1. Order the Bricks
- Lay a size of rope alongside the sting of your backyard mattress, following its contours.
- Mark the rope on the finish of the mattress with tape, pull it taut, and measure the rope on top of things. Divide that size in inches by the width of the bricks to calculate the quantity you may want, then add 10 % to your order. For instance: 324 inches ÷ 4 inches (brick width) = 81 bricks + 10 % = 89 bricks.
- Make certain to purchase clay pavers, typically known as severe-weather-rated bricks.
2. Scout the Curves
- Line the sting of the mattress with bricks, tight in opposition to the grass line—shut to 1 one other however not fairly touching, leaving a niche for the sand.
- To work round mushy curves, fan them out barely; for tight curves, discover the middle or peak of the curve and depart a triangular hole, as proven. The widest level of the hole needs to be no wider than a brick.
3. Mark the Bricks
- You may make angled keystone bricks to fill the triangular gaps within the curves. Middle a brick over a niche, and use the masonry pencil to mark its finish the place it overlaps its neighboring bricks, as proven. Mark the alternative finish of the brick in the identical manner.
4. Switch the Marks
- Flip the brick over, and switch the marks from every finish onto its face. Use the masonry pencil, and a straightedge if obligatory, to attract strains connecting the marks at every finish of the brick to type your cutlines.
5. Lower the Keystones
- With the brick marked, relaxation it on a piece floor with the cutlines faceup. Match the round noticed with the segmented diamond blade. Alter the depth of the blade so that it’ll simply barely reduce by way of the brick in a single go.
- To reduce mud, trickle water onto the brick as you chop; use the nail to puncture the underside of the water bottle to create a gentle trickle. Set the reduce keystone brick into the opening to ensure it matches.
6. Dig the Trench
- Place the tarp over your grass to gather soil as you dig.
- Utilizing the spade, dig a trench with straight sides alongside the size of the mattress, working from the grass line into the mattress. Make the ditch a number of inches wider than the size of your bricks.
7. Examine the Depth
- Dig till the soil modifications coloration, indicating that you’ve got gotten previous the topsoil.
- Measure the depth of your trench, as proven; it needs to be at the least 6 inches deep to permit for a 2- to 3-inch layer of paver base, 1 inch of stone mud, and the bricks set flush with the bottom.
8. Pack the Paver Base
- Unfold the paver base evenly all through the ditch, stopping periodically to pack it down with the tamper, as proven.
- Proceed so as to add the fabric in small batches till it kinds a base that is at the least 2 to three inches deep.
- For those who needed to dig deeper than 6 inches to achieve previous the topsoil, proceed so as to add and pack the paver base till the depth of the tamped trench is the same as the thickness of a brick, plus 1 inch for the stone mud.
9. Combine the Stone Mud
- In a big wheelbarrow, combine collectively stone mud and portland cement in a 6:1 ratio, utilizing six shovelfuls of stone mud for each shovelful of cement.
- Use the backyard hose to mist (however do not soak) the combination to activate the cement and make it simpler to combine and shovel into the ditch.
10. Lay the Bricks
- Working in stretches a number of toes lengthy, use the trowel to cowl the paver base with the stone-dust combination.
- Press the bricks into place separately, tapping them down with the rubber mallet.
- Make the face of every brick flush with the bottom on both aspect of the ditch and with the brick previous it. Proceed, brick by brick, and set the reduce keystones at curves, sustaining a constant hole.
- Use any leftover stone mud to backfill alongside the again fringe of the bricks, then cowl it with soil.
11. Fill the Gaps
- With the bricks set, pour polymeric sand over them and use the comb to comb it into the areas between them, as proven.
- Working your manner down the mattress, whack the bricks with the rubber mallet to pressure the sand to pack itself tight.
- Proceed to fill the gaps till the sand is flush with the faces of the bricks and will not settle any farther.
12. Hose off the Edging
- Brush away any extra polymeric sand or mud; both one can stain the bricks if it will get damp.
- With the hose, wash the edging with a mild spray, dampening the sand between the bricks with out dislodging it. Because the sand absorbs water, it would set, performing like grout to lock the bricks in place for years to come back.