Install Concrete Landscape Edging | AKA: Concrete Border

Install Concrete Landscape Edging | AKA: Concrete Border

A DIY tutorial on the best way to set up concrete panorama edging to enhance your property’s curb enchantment.

Fluffy peonies, sunny daffodils, and funky hydrangeas…isn’t it nice to plant these attractive blooms simply as soon as and see them reappear in your backyard yr after yr?

You're reading: how to concrete garden edging

Everybody desires of a well-kept backyard that doesn’t want quite a lot of effort to keep up.

And whenever you’ve lastly created your perennial flower mattress design, how do you outline the house and intensify it?

In case you’re in search of data on a simple however ornamental landscaping edging possibility, you’ve come to the suitable place.

This tutorial will present you the best way to set up a easy concrete panorama edging.

How a lot does it value to put in concrete edging?

This can rely upon how huge the edging might be and the way lengthy the border is.

My greatest estimate for concrete is round $3.75 per sq. foot.

Easy Concrete Borders

Disclosure: This publish comprises some affiliate hyperlinks or referral hyperlinks in your comfort. It’s a manner for this website to earn promoting commissions by promoting or linking to sure merchandise and/or companies, click on right here to learn my full disclosure coverage.


  • concrete
  • gravel
  • water
  • 1/4″ bender board (plywood) or 1/2″ plywood (or 2×4’s)
  • 12″ wooden stakes
  • 1″ screws (or 1-1/4″)


  • hammer
  • drill
  • round noticed (or desk noticed)
  • wheel barrel
  • trenching shovel
  • concrete margin towel
  • concrete edging device
  • rubber float
  • clamps

You may print the fabric listing and directions under.

SIDE NOTE: That is my first time doing any concrete work. There are most likely strategies to make the method even simpler. I’m additionally finishing this challenge with the least quantity of instruments wanted to assist save on the fee.


To start out your concrete edging challenge, draw a plan of precisely the place the edging might be in your backyard.

You may set the design through the use of your backyard hose or string. We used string with wood stakes.

After you will have positioned one aspect of the structure, add a spot and lay out the opposite aspect of the border. This hole will characterize the width of your edging.

TIP: Have your edging a minimal of 4″.

You additionally have to issue within the width of the fabric you’ll use to carry the moist concrete collectively. Take the width of the edging and add 2″ (when you’re utilizing 2×4’s, add 4.5″). That is how huge you want the hole between your border and the filth.


After getting the form and size you need in your concrete border, use a trenching shovel to dig together with the design, on each the within and out of doors of the border.

digging trench for concrete landscape edging

After you will have dug together with the structure, excavate the filth and grass inside this space till you will have a 4″ deep trench.

Find out: what to wear to a garden wedding 2018

SIDE NOTE: That is when a tarp and wheelbarrow turn out to be useful to gather and cart off the filth and grass.

TIP: Attempt to make the perimeters of the ditch as vertical as you may, not angled.


Now that the ditch is dug, you may construct your concrete type to carry the concrete till it’s set. The boards that you’ll use to create the shape may even want a spot to anchor to (wood stakes).

Begin by slicing a 1/4″ or 1/2″ sheet into 3-7/8″ strips. You’re going to get twelve 8-foot strips per sheet.

SIDE NOTE: The three-7/8″ is factoring in a 1/8″ blade minimize.

TIP: If you’re utilizing a round noticed to chop the sheet, use a ‘rip-cut’ to make the method simpler. In case you’re unsure what that’s, see my publish about the best way to use a rip-cut for a round noticed.

And when you have the noticed out, put together a spacing template to make sure a uniform hole, I used one of many wooden stakes. This template must be the width of the edging plus the dimensions of your wooden materials (1/4″ or 1/2″). For instance, if you’d like your edging to be 4” and you’re utilizing a 1/2” materials, your template can be 4-1/2”. Minimize a board to this measurement.

SIDE NOTE: Use a stake when you should not have a scrap board.

As soon as the strips are minimize, you can begin assembling your type.

Place a 12″ stake at first of 1 aspect of the ditch. You’ll hammer the stake into the bottom in order that the highest of the stake is degree with the bottom.

Then, place the primary strip of wooden into the ditch. Clamp the wooden to the stake, ensuring the tip of the board hits the start of the place you need the edging and the highest of the board is degree with the highest of the stake.

Safe the board to the stake utilizing two screws, one towards the underside and one towards the highest. You will want to take away the clamp for one screw.

TIP: It’s possible you’ll want to make use of a 90-degree drill attachment.

The size of your strips will decide how far aside you’ll house the stakes. If you’re utilizing a 1/4″ strip, you will have a stake about each foot; for 1/2″ materials, about each two ft.

It’s best to place as many as wanted to maintain the shape inside the structure.

SIDE NOTE: It’s best to use extra stakes round turns to correctly safe the shape.

Proceed inserting stakes alongside the structure and safe the board to the stake.

When you’re on the finish of a board, place a stake the place the board might be in the midst of the stake. This manner, you may set up one other board on the identical stake.

screws holding 1/4

Now you’re prepared to position the shape for the opposite aspect of the structure. Start through the use of your spacing template (a board the dimensions of the specified concrete border plus the dimensions of your type materials, 1/4″ or 1/2″).

Place the spacing template towards the already put in type; then, place a stake the place the template ends. Proceed putting in stakes in the identical manner for the size of 1 strip of board.

Find out: how to get rid of white butterflies in the garden

Then, connect the board to the stakes utilizing clamps and screws.

Repeat this course of till the shape is full.

SIDE NOTE: When you’ve got points with a board staying in place, you may minimize spacers to assist the boards from bowing collectively.

SIDE NOTE 2: It’s possible you’ll discover that my concrete edging will not be the straightest – there are two the explanation why. First, I didn’t add sufficient stakes to maintain the shape straight and second, I ought to have used 1/2″ for the straight sections. So, please study from my errors!


Now that your type is finished, you want to pack down the filth inside the shape.

Subsequent, add a 1/2″ layer of gravel into the shape.


You are actually prepared to combine your concrete and pour it into your type.

It’s possible you’ll need to use a mixer, relying on the quantity of concrete you want (most concrete firms have a calculator, just like the Concrete Calculator from Quikrete). In case you’re not utilizing a ton of luggage, combine it in a wheelbarrow or plastic tub in accordance with the directions on the bag.

After getting the consistency you want, pour the concrete into the shape.

adding concrete to concrete landscape edging

Work the concrete into the perimeters and make it degree with the shape.

level the concrete border

Then, use the concrete edging device to present you a barely rounded edge.

rounding edge of concrete border

About each three to 4 ft add a joint about 1″ deep. This can be a managed joint in order that the concrete will crack on this line if wanted.

Work the concrete to provide the end you need.

Proceed this course of till you will have added concrete to the entire size of the shape.


As soon as the concrete is in place, it must remedy. Be sure that to comply with the directions in your concrete bag by both making use of a sealer or retaining the concrete barely damp for a few days.

Do not forget that you shouldn’t permit quite a lot of water (rain or sprinklers) to hit the curing concrete, so make sure to cowl the concrete with tarps if wanted.


After the concrete has cured, round three days, you may take away the shape.

I discovered I had to make use of a pair of pliers to clamp the stakes to drag up.


As soon as the shape is discarded, fill in across the concrete edging with the filth you eliminated earlier than.

And now, your flower mattress is trimmed with basic, sturdy concrete edging! Mowing round your landscaping might be easy and this edging will final a very long time!

Concerned with extra Landscaping tasks? Right here’s extra posts you may get pleasure from:

Read: A leaky outdoor tap is something we all experience at one time or another. As they age the components fail and an occasional servicing ensures that they

  • Sprinkler System Set up
  • Set up Underground Gutter Drainage
  • Computerized Watering System For Crops
  • Construct a easy hose sprinkler
  • Set up a rain barrel