how to lay a brick garden path

how to lay a brick garden path

Laying a backyard path is a brilliant alternative for any outside area. A path connects a backyard to the house it belongs to, supplies a sensible solution to navigate the area and provides a sexy and classy design function.

There are a variety of how to put a backyard path – so beneath you’ll discover step-by-step guides on the best way to lay a path in your backyard utilizing concrete pavers, gravel or brick, and the advantages of every.

You're reading: how to lay a brick garden path

How do I lay a backyard path with concrete pavers?

If you may be utilizing your path rather a lot then hardy concrete paving is perhaps a great possibility. It should additionally provide the probability to combine colors and supplies to create a novel design. Right here’s the best way to lay a backyard path with concrete pavers:

  1. Mark the route of the trail with pegs and a line
  2. Dig 170mm into the soil alongside the route of your path
  3. Lay a compacted sub-base of 100m
  4. Cowl the realm with 40mm of concrete combine
  5. Lay concrete pavers 15mm into the concrete, leaving a 10mm hole between them
  6. Depart to set for at the least 24 hours
  7. Fill the gaps between the concrete pavers with Weatherpoint 365

What instruments do I would like?

  • Trowel
  • Spade
  • Rake
  • Wheelbarrow
  • Rubber mallet
  • Spirit stage
  • Tape measure
  • String line and pegs
  • Screed board
  • Cement mixer (elective)

What supplies do I would like?

  • Paving slabs
  • Sub-base combination
  • Sand
  • Cement

Step-by-step: Laying a backyard path with concrete pavers

Laying a garden path with concrete pavers

Prepping the realm

When you’ve selected the route of your backyard path, mark out the chosen space with pegs and string, hammering the pegs into the bottom with a rubber mallet.

Get digging

Dig out the trail with a spade, aiming for a depth of 170mm that can include the sub-base, cement and concrete. Be sure the soil is evenly compacted.

Layer up

Pour within the sub-base, compacting it to a depth of 100mm. Then begin folding up your concrete combine, which needs to be three elements sand to 1 half cement, and have a doughy consistency. You’ll want sufficient concrete to type a good 40mm layer on prime of the sub-base.

Paving the way in which

It’s then time so as to add your concrete pavers. Lay these one after the other, urgent them 15mm into the concrete combine. Faucet them gently into place with a rubber mallet, and intention to depart a 10mm hole between every one. Depart them to set for twenty-four hours.

Ending up

As soon as they’re set, use a trowel to fill the gaps between the pavers with Marshalls Weatherpoint 365.

You might want to know: what is a winter garden in a flat

How do I lay a backyard path with bricks?

Laying a path with bricks is a good way so as to add a sexy function to your backyard. It’s comparatively simple to create a brick path that meanders by way of your backyard, whereas additionally they present a robust, sturdy floor. Right here’s the best way to lay a backyard path with bricks:

  1. Mark the road of your path with pegs and string
  2. Dig 180mm into the soil alongside the route of your path
  3. Set plastic panorama edging alongside the within
  4. Fill the excavation with 80mm damp sand, compacted
  5. Set your bricks within the sand with a rubber mallet, leaving 20mm between them
  6. Sweep sand into the joints, leaving a skinny layer on prime

What instruments do I would like?

  • Spirit stage
  • Rubber mallet
  • Spade
  • Wheelbarrow
  • Pegs and string
  • Screed board
  • Broom

What supplies do I would like?

  • Bricks or cobblestones
  • Plastic panorama edging
  • Sand
  • Spray marking paint

Step-by-step: laying a backyard path with bricks

Laying a garden path with bricks

Plot your format

Take into consideration the route of your backyard path after which mark it out with pegs and string, hammering the pegs into the bottom with a rubber mallet.

Dig out the trail

Take your spade to the soil, digging 180mm down alongside the route of your path. Use a spirit stage to verify the soil is even.

Set the sting

Line the insides of the excavation with plastic panorama edging, which can assist guarantee your backyard path has clean and clear traces.

Add sand

Pour in 80mm of sand and compress with a screed board. The sand needs to be barely damp to assist it pack higher.

Lay your bricks in

Set the bricks down one after the other, beginning on the close to facet earlier than working outwards. Intention to depart round 20mm between every one. Gently faucet them into the damp sand with a rubber mallet.

Fill the joints

Sweep sand into the joints, leaving a skinny layer on prime. Then let it dry and sweep it in once more, working the broom forwards and backwards till the joints are stuffed. Depart them to set for twenty-four hours.

Read: how to stop magpies in your garden

How do I lay a backyard path with gravel?

Laying a backyard path with gravel is a good way so as to add a pure look to your backyard and it’s additionally a great possibility in the event you’re searching for one thing that doesn’t require an excessive amount of upkeep.. Right here’s the best way to lay a gravel backyard path:

  1. Mark the road of your paths with pegs and string
  2. Dig 60mm into the soil alongside the route of your path
  3. Match edging boards to the pegs
  4. Line the trail with panorama material, trimmed to suit
  5. Pour gravel to fill the trail and rake it stage

What instruments do I would like?

  • Spirit stage
  • Rubber mallet
  • Spade
  • Wheelbarrow
  • Pegs and string
  • Rake
  • Screed board

What supplies do I would like?

  • Gravel
  • Panorama material

Step-by-step: laying a backyard path with gravel

Laying a garden path with gravel

Plot your format

Mark out the route of your backyard path with pegs and string. Drive within the pegs at 1m intervals, stage with the bottom.

Excavate

Dig 60mm into the soil, utilizing a spirit stage to verify it’s even.

Set edging

Match handled edging boards to the pegs – these will assist include the gravel inside the path and cease it spilling out on to the backyard.

Line it with panorama material

Trim panorama material to suit the bottom of your path, and lay it down. Give the material an overlap of at the least 100mm if you want to use a number of sheets to fully cowl the realm.

Pour within the gravel

Add the gravel and rake it stage. You could discover you want to add extra when the trail has settled because the floor is prone to sink barely.

Would you like to have an knowledgeable lay your backyard path? Get in contact at present or click on right here to search out your nearest Marshalls-accredited installer.

Find out: rabbits in garden how to get rid of