- Sort of wooden to make use of for raised backyard beds:
- The right way to Construct a Raised Backyard Mattress with Legs:
- 1. Make preliminary lumber cuts
- 2. Connect the 1×2 boards to the underside of two 1x6s to create a ledge
- 3. Assemble raised planter bins
- 4. Connect wooden legs to DIY raised backyard mattress
- 5. Add backside wooden slats & high trim to DIY raised planter field on legs
- 6. Put together DIY raised backyard mattress with legs for planting and begin planting!
I’m excited to share with you methods to construct a raised backyard mattress with legs! This DIY raised backyard mattress is a extremely enjoyable and simple challenge that takes just some hours to construct!
The choices are limitless for what you’ll be able to plant within the backyard mattress as nicely.
You're reading: how to make a raised garden bed on legs
It looks as if everyone seems to be getting out within the sunshine and performing some gardening nowadays. I used to be impressed by these raised backyard beds by Julia and Thomas of Gal Meets Glam which they stuffed with plenty of greens, herbs, flowers, and dahlia tubers.
We don’t have the very best arrange in our yard for giant backyard beds, so I made a decision to make a cute, smaller measurement, DIY raised backyard mattress with legs.
Additionally, we selected an elevated backyard mattress so we don’t must bend over and we will transfer it round if wanted. It’s nice for small outside areas or patios too!
A couple of years in the past, I constructed my DIY vertical planter stand which was nice for planting flowers and herbs off the bottom, however this elevated backyard mattress gives extra space for a lot of planting choices!
Sort of wooden to make use of for raised backyard beds:
We used cedar wooden to construct the raised backyard mattress. It’s a bit costlier, however cedar is of course climate resistant and can final a number of extra years in comparison with inexpensive wooden like pine. And it doesn’t must be handled. The full price of this construct was about $125 in lumber.
Be aware, this put up accommodates some affiliate hyperlinks. For more information see my disclosures right here.
The right way to Construct a Raised Backyard Mattress with Legs:
The ultimate measurement of this planter is 30 3/4″ tall x 18″ broad x 39″ lengthy and eight 1/4″ deep.
Try the video tutorial right here:
Subscribe to my YouTube Channel right here!
1. Make preliminary lumber cuts
Click on right here for the printable DIY raised backyard mattress plans together with the lower record and constructing steps!
Use a miter noticed and make the next lumber cuts from the 1×6 cedar wooden:
- 4 items @ 36″
- 4 items @ 16 1/2″
Make the next lumber cuts from the 1×4 cedar wooden:
- 8 items @ 30″
And make the next lumber cuts from the 1x2s:
- 2 items @ 34 1/4″
Be aware, earlier than we began reducing our lumber, we sanded the wooden. For recommendations on straightforward sanding, try my methods to sand wooden information!
2. Connect the 1×2 boards to the underside of two 1x6s to create a ledge
Connect one of many 34 1/4″ 1×2 boards to the underside fringe of one of many 36″ boards. Be sure it’s centered and use 1 1/4″ self tapping deck screws to connect it. Be aware, initially I used 4 screws for attaching, however after taking this photograph I ended up including 2 extra for a complete of 6 screws for optimum help.
Repeat this step on one of many different 36″ 1×6 boards.
3. Assemble raised planter bins
Mark 3/8″ in from each edges of the 16 1/2″ 1×6 boards. Then pre-dill two pilot holes on every of these marks. Though, the self tapping screws don’t require pre-drilling, we used pilot holes for this step in order that we drilled a extra exact and straight gap since we have been drilling by way of the sting of the opposite board.
Connect one of many 16 1/2″ 1×6 boards perpendicular on the tip of one of many 36″ boards with the 1×2 ledge, utilizing 1 1/4″ deck screws by way of the pre-drilled pilot holes. Tip, drill the screw in gently since cedar wooden may be very gentle and also you don’t need the wooden to separate when drilling.
Repeat the above step on the other facet utilizing the opposite 36″ 1×6 boards with a ledge. Be sure the 1×2 ledges are each on the underside sides of the planter field.
Subsequent, repeat the above steps to create a second planter field, aside from this field, no 1×2 ledges are wanted. Now your raised planter mattress field body is full!
Alternatively, for becoming a member of these bins, you could possibly use a Kreg Jig and pocket holes. I initially was going to affix them that approach however determined to maintain this construct tremendous easy with customary instruments like a drill and nailer!
4. Connect wooden legs to DIY raised backyard mattress
Connect one of many 30″ 1×4 items to a different 30″ 1×4 board with a beneficiant quantity of wooden glue and 1 1/4″ brad nails alongside the lengthy edge to create one of many raised backyard mattress legs.
Repeat this step for the opposite three legs.
Connect the highest planter field, the one with out the ledges, to the highest of two of the wooden legs. Use 2-3 deck screws on all sides of the leg. I hooked up my screws from the within nook of the planter field so no screw holes would show from the skin.
Stack the underside planter field beneath the highest planter field and connect with screws to the wooden legs. Be sure the ledge facet is on the underside of the planter field.
You might want to know: how to make a garden trough
Flip the planter field over and repeat these steps on the other facet with the remaining two wooden legs.
5. Add backside wooden slats & high trim to DIY raised planter field on legs
Measure the within width of your planter field. Minimize six 1x6s to this measurement much less 1/4″. Then lay these 6 board slats out on high of the 1×2 ledge, spaced out about 3/4″ to create the underside of your raised planter mattress. Safe every board in place with 1 or 2 brad nails on all sides into the 1×2 ledge.
End off the highest of the raised backyard mattress with the remaining 1×2 boards lower to measurement to trim out the highest edges. Connect the trim with brad nails.
6. Put together DIY raised backyard mattress with legs for planting and begin planting!
Lay some weed barrier within the backside of the planter to stop the filth from popping out of the slats. Then, fill the planter field with soil particularly fitted to raised backyard beds.
Lastly, begin planting recent herbs and flowers!!
We love how our raised backyard mattress turned out! It has been so enjoyable planting in it and selecting recent herbs for our day by day cooking proper from our yard!
We planted lavender, plenty of basil, purple pepper, mint, rosemary, parsley, and marigolds which I heard is a superb companion flower for a herb backyard.
I hope this tutorial on methods to construct a raised backyard mattress on legs has been useful! What would you plant in your backyard mattress? I’d love to listen to!
I’m planning on making some coordinating plant markers quickly, which I’ll share as soon as I’m completed making them!
Observe alongside on my newest initiatives and sneak peaks on Instagram, YouTube, and Fb!
Need to save for later?! Pin it right here:
Sharing is caring!
You might want to know: how to keep possums out of the garden