How to make a rag rug from old T-shirts
Old cotton T-shirts rarely wear out evenly. Fading at the collar, a small hole near the hem, or sleeves that no longer fit can still leave plenty of useful fabric for a rag rug. Cutting the shirts into wide jersey strips and coiling them creates a soft, durable mat that suits a relaxed home and keeps reclaimed material out of the rubbish bin.
This method uses a sewing machine for the long joins, although the final coils can be stitched by hand. It suits cotton jerseys with enough body to lie flat rather than slim, silky shirts. Australian op shops, charity-market stalls and community thrift stores in Sydney, Melbourne and Brisbane are good places to look for a varied pile of T-shirts, while cricket, school and surf-club shirts already in the wardrobe can add useful colour and history.
Choose shirts that will wear well
Choose medium-weight cotton, or a cotton-rich blend, and inspect each shirt before cutting. Labels, claims and faded graphics can be removed, but pinholes, brittle patches and thin areas need to be avoided. If a shirt is lightweight, place two strips together when making the rug rather than letting its edges stretch under the stitching.
Wash the shirts according to their labels, separately if they are strongly coloured, and dry them out of harsh sunlight. Australian UV is intense enough to fade fabric over time, but washing before cutting also reveals shrinkage and weak spots. Sort the dry shirts by colour, then decide whether you want a cheerful mixed design, tonal stripes, or blocks of one colour with another as an accent.
Set out fabric scissors or a rotary cutter, a quilting ruler, pins, a sewing machine, cotton thread and a tapestry needle. Eight to ten adult T-shirts usually provide ample material for a circular rug about one metre across; sleeves and smaller garments can fill gaps in the design. Keep small scraps in a separate basket because they are useful for repairs and fringe.
Cut even strips for a strong base
Decide on the width of the strip before cutting. A width of 3.5 to 4 cm gives good coverage without making the coil difficult to bend. For the neatest strips, cut the front and back of each shirt into separate panels, then slice those panels into even bands. This avoids bulky side seams and makes the colours easier to plan.
Use a ruler and fabric marker to mark the bands, and keep the fabric flat rather than stretching it as you cut. Cut lengthwise with the main grain when the jersey is noticeably elastic, which helps the strips resist curling. Sleeve pieces can supply shorter strips or contrast bands, but trim away thick seams and awkward curves.
Test the width by laying several strips edge to edge. Any narrow band can create a ridge or gap in the spiral, so trim it to match or reinforce it with a narrow strip. Before sewing, check that each 2 cm overlap fits completely within the ends; short or tapered pieces need a second layer.
Join strips into one continuous band
Join the strips into one long, continuous band. Place two short ends right sides together with a 1.5 to 2 cm overlap, pin them and sew across the full width. A medium straight stitch is secure on cotton jersey; a 5 mm zigzag setting adds flexibility if the fabric curls. For extra strength, sew a second row just above the first.
Press each seam open if the band wrinkles, then continue joining in the order you chose. Working one colour at a time creates broad sections, while changing colours after every few strips gives a broken, mosaic-like rug. Keep the strip under even tension, as jersey stretches easily and can otherwise pull the rug out of round.
Make the band longer than the final rug seems to need, ideally with about 15 per cent left over. It is easy to underestimate the length required for a spiral. Braiding three narrow strips is another traditional option, but it takes longer and produces a thicker, narrower rug with a different texture.
Coil and stitch the rug
Choose the shape before the first turn. A circle is the simplest because the strip can follow the same spacing all the way around. Trace a circle on paper if you want a guide, then place it on the floor and pin the starting end at the centre with the desired side facing up. Coil clockwise or anticlockwise, keeping the band flat.
As the spiral grows, bring each new turn against the previous one and pin it every 10 to 15 cm. Stitch the touching edges together with doubled strong thread and a tapestry needle. A blanket stitch or ladder stitch every 2 cm is firm without making the seam excessively bulky; on a machine, a zigzag along the joined edges saves time.
Work from the centre outwards, checking the outline as you go. Do not pull the stitches tight, since tension can distort the coil. Fold the final end under, secure it with a whip stitch and trim the strip to an even length. On timber or tile floors, place the rug over a non-slip underlay rather than gluing it down, so it can be moved for cleaning.
Care for and repair the rug
Vacuum the rug gently, preferably without a rotating beater bar, and lift it occasionally to clean the floor beneath. Turn the rug over when one side receives more wear. Keep it out of prolonged direct sunlight where possible, because Australian sun can fade the colours and weaken exposed cotton fibres along the outer edge.
Most sturdy rag rugs can be washed, but first tug the coils and inspect the joins. For a washable rug, use lukewarm water and a small amount of mild detergent in a bathtub, press the water through rather than wringing it, rinse, press out excess water and dry it flat in shade. Humid weather can slow drying, so use a rack or fan and avoid folding a damp rug.
Treat spills quickly by blotting with a damp cloth and a little mild soap; avoid bleaching or harsh stain removers, which can damage dyed jersey. If an edge opens, patch it with a matching strip and ladder stitch before the loose section spreads. Store a dry rug rolled rather than folded, with breathable paper around it, and keep the underlay underneath in daily use.
An upcycled rug keeps the stories of the shirts in plain sight: the bright club colour, the faded holiday shirt and the favourite team emblem all become part of the room. Its slightly uneven surface is part of the charm, and the visible joins show that the material was saved rather than replaced. The next step is to wash three T-shirts, cut one 4 cm strip from each and sew them together as a test seam before cutting the rest.